LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper JCW Clubman, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 754 (Body Equipment - Repair - Cooper (R50) , Cooper S (R53) & Convertible (R52)) >> Trim, Covers, Handle Trim >> 51 13 100 Removing and installing/replacing trim on hood/bonnet/wheel arch on left or right

51 13 100 Removing and installing/replacing trim on hood/bonnet/wheel arch on left or right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Release nut (1) and clips (3).

Remove trim (2) outwards.

Fig 1: Identifying Nut And Clips On Trim
G00426857Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Clips (1) of trim must not be damaged or missing, replace if necessary.

Fig 2: Locating Clips Of Trim
G00426858Courtesy of BMW OF NORTH AMERICA, INC.