LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Countryman, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Axle Shafts - Cooper (R50), Cooper S (R53) & Convertible (R52)) >> Removal, Disassembly, Reassembly & Installation >> Wheel Speed Sensor >> Installation

Wheel Speed Sensor: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Ensure plug connection is correctly engaged and rubber grommet correctly sealed. Clean bore hole for speed sensor and grease with Staburags NBU 12/K lubricating grease. See Fig 3 . See TORQUE SPECIFICATIONS  .

Fig 1: Removing Wheel Speed Sensor
G00301704Courtesy of BMW OF NORTH AMERICA, INC.
Fig 2: Removing Cable From Retaining Clip
G00301705Courtesy of BMW OF NORTH AMERICA, INC.
Fig 3: Identifying Speed Sensor Bore Hole
G00301706Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals