LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Countryman, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Airbag, Audio, Navigation And Anti-Theft - Repair (R60) -- Cooper Countryman >> Airbag Control Units, Airbag Sensors >> 65 77 016 Removing and installing airbag control unit

65 77 016 Removing and installing airbag control unit

WARNING: Comply with AIRBAG SAFETY REGULATIONS .
Incorrect handling can lead to airbag deployment and cause injury.
IMPORTANT: Read and comply with NOTES ON PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary work: 

Unscrew nuts (1).

Tightening torque 65 77 1AZ .

Take off earthing cable (2).

Unlock plug connection (3) at airbag control unit (4) and disconnect.

Fig 1: Identifying Airbag Control Unit, Plug Connection, Earthing Cable And Nuts
G11009877Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Take off holder (2).

Fig 2: Identifying Holder And Nuts
G11009878Courtesy of BMW OF NORTH AMERICA, INC.

Slacken nut (1).

Tightening torque 65 77 1AZ .

Remove airbag control unit (2).

Fig 3: Identifying Airbag Control Unit And Nut
G11009879Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out VEHICLE PROGRAMMING AND ENCODING

scientia non olet · About LEMON Manuals