66 20 534 Removing and installing/replacing rear left ultrasonic sensor

Necessary preliminary work:

On version with JCW Aerodynamic package:

NOTE: The ultrasound converter (1) can be replaced without dismantling the bumper panel.

Fig 1: Identifying Ultrasound Converter

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock associated plug connection and disconnect

Spread latches and remove ultrasound converter (1) from bracket (2).

Installation note:

Before installation of ultrasonic sensor (1) on wiring harness, clean plug connection.

Fig 2: Identifying Ultrasound Converter And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.