65 77 725 Removing and installing/replacing right B-pillar sensor

WARNING: Comply with AIRBAG SAFETY REGULATIONS .
Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks:

Release screw (1).

Release screw (2) and feed out sensor.

Tightening torque 65 77 3AZ .

Disconnect associated plug connection.

Installation:

Retaining lug (3) must not be damaged.

Make sure sensor is securely seated.

Fig 1: Identifying B-Pillar Sensor Retaining Lug And Screws

Courtesy of BMW OF NORTH AMERICA, INC.