51 23 110 Removing and installing/replacing left hood/bonnet lock

Release screw (1).

Feed out expansion tank (2) and lay to one side.

Release screws (4) and feed out hood/bonnet lock (3).

Tightening torque 51 23 3AZ .

Fig 1: Identifying Expansion Tank, Hood/Bonnet Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage Bowden cable (1) in direction of arrow from engine compartment lid lock (2).

Fig 2: Disengaging Bowden Cable From Engine Compartment Lid Lock

Courtesy of BMW OF NORTH AMERICA, INC.