52 13 036 Removing and installing/replacing actuating unit for left or right seat back release

Necessary preliminary tasks: 

Version with  rear panel:

• Remove REAR PANEL  on front seat backrest.

Version without  rear panel:

• Raise release handle and release screw (1).

Tightening torque 52 13 05AZ .

Detach release handle.

Release screws (2).

Tightening torque 52 13 07AZ .

Fig 1: Detaching Release Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Remove actuating unit (1) from backrest frame.

Fig 2: Removing Actuating Unit From Backrest Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage Bowden cable (1) from actuating unit.

Fig 3: Disengaging Bowden Cable From Actuating Unit

Courtesy of BMW OF NORTH AMERICA, INC.