63 31 020 Removing and installing/replacing footwell light (splitdoor)

Special tools required:

IMPORTANT: Follow instructions for HANDLING LIGHT BULBS (INTERIOR LIGHTS) .

Lever footwell light frame (1) with special tool 64 1 020 in direction of arrow out of door trim panel (2).

Fig 1: Removing Footwell Light Frame Using Special Tool (64 1 020)

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unclip footwell light (2) in direction of arrow from footwell light frame (3) and remove towards rear.

Replacement:

If necessary, remove BULB .

Fig 2: Removing Footwell Light

Courtesy of BMW OF NORTH AMERICA, INC.