51 22 253 Removing and installing/replacing door opener lever at bottom

Special tools required:

Necessary preliminary tasks:

Disconnect Bowden cable (1).

Fig 1: Identifying Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip trim (1) with special tool 00 9 323 .

Installation:

Ensure trim (1) is correctly seated.

Fig 2: Unclipping Trim With Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and feed out lever (2).

Installation:

To install, feed in Bowden cable through door lock opening at bottom.

Fig 3: Identifying Lever And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Unclip trim (1) with a suitable tool and disengage Bowden cable (2).

Fig 4: Identifying Trim And Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.