51 16 026 Replacing mirror glass

Special tools required:

00 9 317

WARNING: Move mirror glass with hand carefully and slowly.
If mirror glass is damaged:
Wear protective goggles and cut-proof gloves.
Danger of injury by flaking-off glass splinters.

IMPORTANT: Bring exterior mirror to room temperature to prevent catches from breaking off.

NOTE: Secure mirror glass (1) against falling out.

Mirror heating cables are very short.

Press mirror glass (1) on side vehicle by hand to full extent.

Fig 1: Unclipping Mirror Glass All Round With Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Affix mirror glass (1) with adhesive tape (2).

Unclip mirror glass (1) all round with special tool 00 9 317 .

If necessary, disconnect related plug connections.

Remove the mirror glass (1).

Installation note:

Retaining lugs (1) must not be damaged.

Fit mirror glass (2) with retaining lugs (1) flush on mirror adjusting drive and clip into place.

Ensure correct locking.

Run a function check.

Fig 2: Identifying Mirror Glass And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.