41 11 150 Replacing cover for left frame side member

Read contents of BODY, GENERAL .

Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.

Use only approved SPOT-WELDING APPARATUS for repairs.

The following new body parts are required:

Fig 1: Identifying Outer Side Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Mark severance cuts in accordance with illustration and cut.

CAUTION: Cut outer plate only for following severance cuts.

Measurement a = approx. 120 mm after elongated hole

dia. 12x18 mm.

Measurement b = approx. 25 mm before bore hole

dia. 12 mm.

Open weld joints in areas (1).

Installation:

Fig 2: Identifying Severance Cuts Mark And Welded Connections Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Mark new part in accordance with severance cuts above and cut.

Weld in REINFORCING PANELS at all severance cuts.