41 62 060 Removing and installing/replacing hinge for left or right splitdoor

Read contents of BODY, GENERAL .

Necessary preliminary tasks:

Release holder (1) in direction of arrow and carefully pull out.

Fig 1: Releasing Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect both plugs (1) and detach plug from holder (2).

Fig 2: Identifying Holder And Plugs

Courtesy of BMW OF NORTH AMERICA, INC.

Release wiring harness (1) from body and carefully feed out.

Installation:

Make sure wiring harness is correctly seated (watertightness).

Release screws and remove holder (2).

Fig 3: Identifying Wiring Harness, Holder, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts and remove splitdoor (1).

Tightening torque 41 62 2AZ .

Fig 4: Identifying Nuts And Splitdoor

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws and remove hinge (1).

Tightening torque 41 62 2AZ .

Fig 5: Identifying Screws And Hinge

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: