41 33 040 Replacing front wall

Read contents of BODY, GENERAL .

The graphics are schematic representations and are to be applied to the relevant vehicle type.

The following body new parts are required:

• (1) Lock bridge
• (2) Front panel

Fig 1: Identifying Lock Bridge And Front Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Remove SUPPORT FOR BUMPER TRIM .

Release screws (1) on both sides of vehicle.

Tightening torque 51 11 7AZ .

Release screws (2) on both sides of vehicle.

Tightening torque 41 33 4AZ .

Fig 2: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.