41 51 080 Removing and installing door

IMPORTANT: Do not damage adjoining body components.

Open door.

Release screw on connector frame.

Front door:

Tightening torque 41 51 3AZ .

Fig 1: Locating Connector Frame Screw

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Secure door against closing.

Remove screw at the door stop.

Tightening torque 51 21 6AZ .

IMPORTANT: Secure door against falling.

Release screws (1) and pull out of hinges.

Tightening torque 41 51 1AZ .

Fig 2: Identifying Hinges Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Pull plug connection from door post, unlock by pulling out bar and detach.

Unhinge door by moving upwards and placing it on a suitable surface.

Installation:

If necessary, adjust DOOR .

Fig 3: Pulling Plug Connection From Door Post

Courtesy of BMW OF NORTH AMERICA, INC.