61 62 032 Replacing wiper arm for rear wiper on left

Special tools required:

Open protective cap (1).

Slacken nut (2). Tightening torque 61 62 1AZ .

Fig 1: Identifying Wiper Arm Protective Cap And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Secure special tool 61 6 210 and wiper arm for rear window (1) against falling off during pressing-off procedure.

Press off wiper arm for rear window (1) with special tool 61 6 210.

Fig 2: Pressing Off Wiper Arm For Rear Window With Special Tool (61 6 210)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Window wiper must be in rest position.

Adjust distance (A = 18 mm) between wiper arm for rear window (1) and lower rear window cover (2).

Fig 3: Adjusting Distance Between Wiper Arm For Rear Window And Lower Rear Window Cover

Courtesy of BMW OF NORTH AMERICA, INC.