LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Clubman, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 757 (General Electrical System - Repair - Cooper (R50), Cooper S (R53) & Convertible (R52)) >> Electronic Control Units, Modules >> 61 35 175 Removing and installing/replacing rain sensor

61 35 175 Removing and installing/replacing rain sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks: 

Pull out locks (1) in direction of arrow and remove rain sensor (2).

Disconnect plug connection (3) and remove rain sensor (2).

Installation: 

Do not damage optical element covered by rain sensor (2).

If necessary, initialize rain sensor (2). Refer to 61 35 680 INITIALIZING RAIN SENSOR .

Fig 1: Removing Rain Sensor
G03307046Courtesy of BMW OF NORTH AMERICA, INC.