11 65 Turbocharger and control
TIGHTENING TORQUE SPECIFICATIONS - TURBOCHARGER AND CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust turbocharger to exhaust manifold | N18 | M8 nut | 20 Nm | |
| 2AZ Stud bolts to exhaust manifold | N18 | M8 | 15 Nm | |
| 3AZ Holder to exhaust turbocharger | N18 | M8 | 25 Nm | |
| 4AZ Oil feed line to exhaust turbocharger | N18 | Banjo bolt M12 x 1.5 | Replace all seals | 30 Nm |
| 5AZ Oil return line to exhaust turbocharger | N18 | M6 x 18 | Replace all seals | 8 Nm |
| 6AZ Holder to crankcase | N18 | M8 | 19 Nm | |
| 7AZ Front heat shield to rear heat shield | N18 | M6 x 20 | 4 Nm | |
| 8AZ Vacuum container | N18 | M8 | 19 Nm | |
| 9AZ Delivery and return coolant lines to exhaust turbocharger | N18 | Hollow bolt | Replace all seals | 35 Nm |