11 36 Variable camshaft control

TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL

	Type	Thread	Tightening specifications	Dimension
1AZ VANOS to inlet and exhaust camshafts	N18	M10 x 1 x 52	Replace screw.
1AZ VANOS to inlet and exhaust camshafts	N18	M10 x 1 x 52	Jointing torque Angle of rotation	20 Nm 180 °
2 Non-return valve VANOS AZ to cylinder head	N18	M14 x 1.5	Replace sealing ring.	13 Nm
3 Solenoid valve holder to AZ crankcase	N18	M6 x 16		9 Nm