11 65 Turbocharger and control

TIGHTENING TORQUE SPECIFICATIONS - TURBOCHARGER AND CONTROL

	Type	Thread	Tightening specifications	Dimension
1 Exhaust turbocharger to AZ exhaust manifold	N18	M8 nut		20 Nm
2 Stud bolts to exhaust AZ manifold	N18	M8		15 Nm
3 Holder to exhaust AZ turbocharger	N18	M8		25 Nm
4 Oil feed line to exhaust AZ turbocharger	N18	Banjo bolt M12 x 1.5	Replace all seals	30 Nm
5 Oil return line to exhaust AZ turbocharger	N18	M6 x 18	Replace all seals	8 Nm
6 AZ Holder to crankcase	N18	M8		19 Nm
7 Front heat shield to rear AZ heat shield	N18	M6 x 20		4 Nm
8 AZ Vacuum container	N18	M8		19 Nm
9 Delivery and return AZ coolant lines to exhaust turbocharger	N18	Hollow bolt	Replace all seals	35 Nm