11 31 Camshaft
TIGHTENING TORQUE SPECIFICATIONS - CAMSHAFT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1 Guide rail, AZ crankcase | N18 | M8 x 1.25 | Replace sealing ring. | 24 Nm |
| 2 Guide rail to cylinder AZ head | N18 | M14 x 1.5 | Replace sealing ring. | 25 Nm |
| 3 Line to cylinder AZ head | N18 | M6 x 20 | 9 Nm | |
| 4 Chain tensioner to AZ cylinder head | N18 | M22 M22 x 1.5 | Do not retighten the chain tensioner. Replace sealing ring. |
80 Nm |