11 36 Variable camshaft control
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ VANOS to inlet and exhaust camshafts | N16 | M10x1 52 | Replace screw. | |
| Jointing torque Angle of rotation |
20 Nm 180 ° |
|||
| 2AZ Non-return valve VANOS to cylinder head | N16 | M14 x 1.5 | Replace sealing ring. | 13 Nm |
| 3AZ Solenoid valve holder to crankcase | N16 | M6x16 | 9 Nm |