11 11 Engine block - table 1 of 2
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK - TABLE 1 OF 2
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Main bearing bolts, observe tightening specifications. | N16 | M9x115 | Replace bolts | |
| Jointing torque Angle of rotation |
30 Nm 150 ° |
|||
| 2AZ Bedplate, observe tightening specifications. | N16 | M6 | Replace bolts Jointing torque |
9 Nm |
| 3AZ Screw plug, gear case upper section | N16 | M22x1.5 | 50 Nm | |
| 4AZ Screw plug, gear case lower section | N16 | M16x1.5 | Replace gasket | 30 Nm |
| 5AZ Oil baffle to crankcase lower section | N16 | M6x100 | 10 Nm | |
| 6AZ Screw plug, gear case lower section | N16 | M16x1.5 | Replace gasket | 30 Nm |
| 7AZ Screw plug, gear case lower section | N16 | M16x1.5 | Replace gasket | 30 Nm |
| 8AZ Screw plug | N16 | M16x1.5 | Replace gasket | 32 Nm |
| 9AZ Bearing journal | N16 | M8x1.25 | Replace O-ring | 23.5 Nm |