11 12 Cylinder head with lid
TIGHTENING TORQUE SPECIFICATIONS - CYLINDER HEAD WITH LID
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cylinder head bolts 10.9 | N16 | M8x95 | Replace screws. | |
| Jointing torque 1. Angle of rotation 2. Angle of rotation |
15 Nm 90 ° 90 ° |
|||
| 2AZ Cylinder head bolts | N16 | M10x145 | Replace screws. | |
| Jointing torque 1. Angle of rotation 2. Angle of rotation |
30 Nm 90 ° 90 ° |
|||
| 3AZ Cylinder head bolts | N16 | M8x35 | Replace screws. | 30 Nm |
| 4AZ Cylinder head cover to cylinder head | N16 | M6x30 | 10 Nm | |
| 5AZ Earth cable to cylinder head cover | N16 | M6/M5 | 10 Nm | |
| 6AZ Bearing support of eccentric shaft to cylinder head | N16 | M6x40 M6x70 |
10 Nm | |
| 7AZ Intake camshaft bearing cap to bearing support | N16 | M6x3 | 10 Nm | |
| 8AZ Exhaust camshaft bearing cap to cylinder head | N16 | M6x40 | 10 Nm | |
| 9AZ Lifting eye to cylinder head | N16 | M8x20 M8x25 |
20 Nm | |
| 10AZ VVT sensor to cylinder head | N16 | M6x40 | 10 Nm | |
| 11AZ Acoustic cover to cylinder head cover | N16 | M6x40 | 8.5 Nm |