11 31 Camshaft
TIGHTENING TORQUE SPECIFICATIONS - CAMSHAFT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Guide rail, crankcase | N16 | M8x1.25 | Replace sealing ring. | 24 Nm |
| 2AZ Guide rail to cylinder head | N16 | M14x1.5 | Replace sealing ring. | 25 Nm |
| 3AZ Line to cylinder head | N16 | M6x20 | 9 Nm | |
| 4AZ Chain tensioner to cylinder head | N16 | M22 M22 x 1.5 | Do not retighten the chain tensioner. Replace sealing ring. | 80 Nm |