41 62 000 Trunk Lid Removal And Installation

WARNING: This page is about a different car, the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, and 2006 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Remove and install panel for rear lid at top .

Unhook Bowden cable on rear lid lock.

Disconnect all plug and socket cable connections on rear lid.

Open nuts (1) on rear lid hinge to rear lid.

Adjust rear lid lock.

Tighten nuts (1) again.

Fig 1: Rear Lid Hinge Nuts

Courtesy of BMW OF NORTH AMERICA, INC.