63 17 075 Removing and installing/replacing right front fog light

Necessary preliminary tasks: 

• Partially detach FRONT WHEEL ARCH LINER
• Release FANFARE

Disconnect plug connection (1).

Release screws (2) and remove fog light insert (3).

Fig 1: Identifying Fog Light Insert, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

On replacement of fog light or bumper panel at front: 

• If necessary, remount bulb. See 63 99 225 REPLACING BULB FOR FRONT LEFT OR RIGHT POSITION LIGHT  or 63 99 201 REPLACING HALOGEN BULB FOR LEFT OR RIGHT FRONT FOG LIGHT .
• Adjust FOG LIGHTS