LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Coupe, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 795 (MAINTENANCE - REPAIR INSTRUCTIONS - 330i, 330Ci, 330xi (M54/E46)) >> Maintenance and General Information >> 00 00... Checking handbrake lever travel, adjusting according to setting specifications if necessary >> Checking parking brake

Checking parking brake

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2006 BMW 330Ci, 2005 BMW 330i, 2005 BMW 330Ci, 2004 BMW 330i, and 2004 BMW 330Ci. However, it is still accessible from the selected car via links, so may be relevant.

There must be no braking effect when the 1st tooth is engaged. The differential of the wheel circumferential forces (left/right wheel) must deviate by max. 30 % from the higher value (measured on the roller dynamometer). Make a readjustment in event of larger deviations in wheel circumferential force.

It must be possible to brake with locked wheels with the handbrake.

The hand/parking brake must be readjusted if the actuating travel exceeds 10 teeth.

For subsequent procedure, refer to PARKING BRAKE .

scientia non olet · About LEMON Manuals