LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Coupe, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 754 (Body Equipment - Repair - Cooper (R50) , Cooper S (R53) & Convertible (R52)) >> Trunk Latch, Locks >> 51 24 130 Removing and installing/replacing striker for rear lid lock

51 24 130 Removing and installing/replacing striker for rear lid lock

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Open tailgate.

Remove trim panel. Refer to 51 49 005 REMOVING AND INSTALLING/REPLACING TRIM FOR LOWER TRUNK LID (TAILGATE) .

Remove Torx screws (1) securing striker.

Tightening torque, refer to 51 24 2AZ in BODY EQUIPMENT - TIGHTENING TORQUES - COOPER (1.6L) R50/W10 .

Remove striker (2).

Fig 1: Removing Torx Screws Securing Striker
G03306703Courtesy of BMW OF NORTH AMERICA, INC.