LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Coupe, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 754 (Body Equipment - Repair - Cooper (R50) , Cooper S (R53) & Convertible (R52)) >> Rear Bumper >> 51 12 157 Replacing rear bumper trim

51 12 157 Replacing rear bumper trim

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks: 

Release clip (1) from ultrasonic transducer (2) and remove ultrasonic transducer (2).

Release clips (3) from ultrasonic transducer (2) and remove from bumper trim.

Fig 1: Releasing Clips From Ultrasonic Transducer
G03306594Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: When releasing the clips, only press on the area next to each clip in each case.

Release screw (1) on spoiler at side.

Release clips (2) on side spoiler from bumper trim.

Release clips (3) on center spoiler from bumper trim.

Remove towing eye cover (4).

Fig 2: Locating Towing Eye Cover
G03306595Courtesy of BMW OF NORTH AMERICA, INC.