LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3904 (COLLISION - BODY PANEL REPAIR (F07) GT Sedan (Except 10-13 535i GT)) >> Luggage Compartment Floor >> 41 12 557 Stripping Operations - Replacing Luggage Compartment Floor, Middle (Tail Panel Removed)

41 12 557 Stripping Operations - Replacing Luggage Compartment Floor, Middle (Tail Panel Removed)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
  • Remove exhaust system (FR number: 1800020)
  • Remove heat shield
  • Remove front and rear spare wheel well trim panel (FR-number: 51 47)
  • Remove battery (FR number: 61 21 010)
  • Remove air supply system (FR number: 37 22 540)
  • Remove left and right trailing links (FR number: 51 71 482)
  • Remove cross reinforcement (FR number: 51 71 480)

Emergency unlocking for electromagnetic parking brake:

Press both detent lugs together and press cable for emergency release (1) downwards.

Fig 1: Pressing Detent Lugs
G06890038Courtesy of BMW OF NORTH AMERICA, INC.

Release screws and remove supports (1).

Release positive battery leads (2) and lay to one side.

Fig 2: Identifying Supports And Positive Battery Leads
G09878621Courtesy of BMW OF NORTH AMERICA, INC.