51 12 070 Replace the center spoiler on rear bumper panel

Necessary preliminary tasks: 

• Remove BUMPER PANEL 

Release catches (1) and remove spoiler (2).

Installation note: 

Catches (1) on spoiler and bumper panel must not be damaged.

Fig 1: Identifying Catches And Spoiler

Courtesy of BMW OF NORTH AMERICA, INC.

Version with PDC: 

Modify all ultrasonic sensors.

Expand latch mechanisms (1) and remove ultrasonic sensor (2) in direction of arrow.

Fig 2: Removing Ultrasonic Sensor

Courtesy of BMW OF NORTH AMERICA, INC.