33 32 Trailing arms and struts
TIGHTENING TORQUE SPECIFICATION - TRAILING ARMS AND STRUTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Upper wishbone to trailing arm | R55/R56/R57/R58/R59 | M12 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
100 Nm |
| 2AZ Lower wishbone to trailing arm | R55/R56/R57/R58/R59 | M12 | TIGHTEN DOWN IN NORMAL POSITION . | 100 Nm |
| 3AZ Wishbone to rear axle support | R55/R56/R57/R58/R59 | M12 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
100 Nm |
| 4AZ Holder, trailing arm to trailing arm | R55/R56/R57/R58/R59 | M14 | TIGHTEN DOWN IN NORMAL POSITION . | 165 Nm |
| 5AZ Trailing arm holder to body | R55/R56/R57/R58/R59 | M12 | 100 Nm |