51 11 157 Replace bumper panel, front

Necessary preliminary tasks: 

• Remove FRONT BUMPER PANEL 

If necessary, swap over outside temperature sensor (1) and lead (2).

Fig 1: Identifying Temperature Sensor And Lead

Courtesy of BMW OF NORTH AMERICA, INC.

Swap over the following parts according to version: 

• LOCATOR LIGHTS
• Fog lights: see LEFT FOG LIGHT (WITH HEADLIGHT CLEANING SYSTEM)/ FOG LIGHT (WITHOUT HEADLIGHT CLEANING SYSTEM) and RIGHT FRONT FOG LIGHT .
  NOTE: ADJUST after fitting.
• Ornamental grille/Center cover: see ORNAMENTAL GRILLE IN BUMPER PANEL  and CENTER COVER 
• Bumper trim panel finisher
• SPOILER 
• CAR REGISTRATION NUMBER