34 11 250 Removing and installing / replacing a brake carrier / brake guard plate at front

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front BRAKE DISKS

Release screws (1) and remove brake guard plate (2).

Installation:

Tightening torque 34 11 5AZ .

Fig 1: Identifying Screws And Brake Guard Plate

Courtesy of BMW OF NORTH AMERICA, INC.