32 11 100 Replacing gaiter for steering box on left or right

IMPORTANT: The steering box must be replaced if the polished surface of the rack is damaged (e.g. corrosion)!

Necessary preliminary tasks:

Clean track rod.

Release EAR CLIP (1).

Installation note:

Clean rack and check surface for damage (e.g. by corrosion).

Grease rack (Lubricating grease FB-1: part number part number 2 208 093).

Release ear clip (1).

Fig 1: Identifying Ear Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Release band clamp (1) and detach gaiter (2) from track rod.

Fig 2: Detaching Gaiter From Track Rod

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clean track rod and apply grease to taper.

Grease track rod at the fit of the gaiter (1) with grease "FB-1, part number 2 208 093".

NOTE: This ensures that the gaiter is not rotated when the track rod is rotated.

Fig 3: Identifying Gaiter

Courtesy of BMW OF NORTH AMERICA, INC.

After installation: