54 34 Motor-driven Convertible Top (Electrical Components)
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUES SPECIFICATIONS - MOTOR-DRIVEN CONVERTIBLE TOP (ELECTRICAL COMPONENTS)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Convertible top main bearing to retaining plate | R52/R57 | 18.5 Nm | ||
| R59 | 24 Nm | |||
| 2AZ Soft top retaining plate to side member | R52/R57 | 10 Nm | ||
| 3AZ Soft top base plate to body | R52/R57/R59 | 7.6 Nm | ||
| 4AZ Soft-top bow bearing to body | R52/R57 | 9.5 Nm | ||
| R59 | 8 Nm | |||
| 5AZ Soft-top bow bolt to body | R52/R57 | 7.6 Nm | ||
| 6AZ Mounting for main bearing screen | R52 | 2 +0.2 Nm | ||
| 7AZ Roof assembly to soft top linkage | R52 | 8 Nm | ||
| 8AZ Front bow to roof assembly | R52 | 7.2 Nm | ||
| 9AZ Electric motor to roof assembly | R52/R57 | 2.9 ±0.5 Nm | ||
| 10AZ Soft-top trim strip to soft-top bow | R52 | 2.4 Nm | ||
| 11AZ Loose fabric bolt | R57 | 10 Nm | ||
| 12AZ Soft-top bow to bearing | R57 | 9.5 Nm | ||
| 13AZ Soft top storage lock | R59 | 5 Nm | ||
| 14AZ Soft-top bow to body | R59 | 3.5 Nm | ||
| 15AZ Stowage lock to soft top frame | R57 | 8 Nm | ||
| 16AZ Cover, C-pillar to main pillar | R57 | 6 Nm | ||
| 17AZ Main pillar to soft top frame | R57 | Screw locking | 8 Nm | |
| 18AZ Guide pin to main pillar | R57 | 8 Nm |
TIGHTENING TORQUES SPECIFICATIONS - MOTOR-DRIVEN CONVERTIBLE TOP (ELECTRICAL COMPONENTS)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Handle to middle lock | R59 | M4 | 2.5 Nm | |
| 2AZ Front bow cover | R59 | 2.5 Nm | ||
| 3AZ Soft top cover to front bow | R59 | 2.5 Nm | ||
| 4AZ Tensioning strap to front bow | R59 | 2.5 Nm | ||
| 5AZ Tensioning strap to front bow | R59 | M6 | 10 Nm | |
| 6AZ Tensioning strap to soft top frame | R59 | M4 | 2.5 Nm | |
| 7AZ Bow cover to bow | R59 | 2.5 Nm | ||
| 8AZ Tensioning strap to bow | R59 | 2.5 Nm | ||
| 9AZ Soft-top bow to body | R59 | M6 | 3.5 Nm | |
| 10AZ Box adjusting screws | R59 | M6 | 12 Nm | |
| 11AZ Stowage lock, middle | R59 | M5 | Replace nuts. | 5 Nm |
| 12AZ Soft top locking, middle | R59 | M6 | 10 Nm | |
| 13AZ Soft top fastener | R59 | M6 | 12 Nm | |
| 14AZ Microswitch to soft top frame | R59 | M4 | 2.5 Nm |