36 10... Notes for repairing aluminium rims
WARNING: This page is about a different variant/trim than selected.
In general, the economic viability must be checked prior to the repair.
It is possible to repair the following damage (applies to cast aluminium rims labelled as AlSi7 AlSi11, AlSi12):
- Depth of the damage in the aluminium at maximum 1 mm
- Distance of the damage from the outer rim edge at maximum 50 mm
- Paintwork damage on the remaining wheel rim
It is not possible to repair the following damage:
- Deformation and cracks
- Polished, forged aluminium wheel rims are unsuitable for repair.