51 13 022 Removing and installing/replacing engine bonnet/hood air guide

WARNING: This page is about a different variant/trim than selected.

Raise bonnet/hood.

Release screw (1).

Fig 1: Identifying Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Detach air guide (1) in upward direction from clips (2).

Installation:

If necessary, replace faulty clips (2).

Fig 2: Identifying Air Guide And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace defective grommets (1).

Fig 3: Identifying Defective Grommets

Courtesy of BMW OF NORTH AMERICA, INC.