51 11 180 Removing and installing/replacing ornamental grille in bumper panel

Necessary preliminary tasks: 

• Remove CENTER COVER 

If necessary, remove outside temperature sensor (1).

Release latch mechanisms (2) and remove ornamental grille (3).

Installation note: 

Latch mechanisms on grille and bumper panel must not be damaged.

Fig 1: Identifying Outside Temperature Sensor And Ornamental Grille

Courtesy of BMW OF NORTH AMERICA, INC.

In the case of replacement and appropriate version: 

• Modify LEFT AND RIGHT FRAME OF AIR INLET FOR BRAKE AIR DUCT