41 11 751 Stripping operations - replace side members and left luggage compartment floor (left side wall and tail panel removed)
WARNING: This page is about a different variant/trim than selected.
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
Stripping operations for side wall and tail panel under 41 35 251
The following list basically represents the removal sequence.
Stripping operations for side wall and tail panel under 41 35 251
- Remove rear axle support (job number: 33 31 000)
Release screws (1) and remove holder (2).
Tightening torque 18 31 8AZ / 11AZ .