41 12 557 Stripping operations - Replacing luggage compartment floor, middle (tail panel removed)

WARNING: This page is about a different variant/trim than selected.

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
Stripping operations for tail panel under 41 34 040

Remove rear axle support (job number: 33 31 000)

Operation is described on the left side. Right side identical.

Release screws (1) and remove holder (2).

Tightening torque 18 31 8AZ / 11AZ .

Fig 1: Identifying Holder And Screws

Courtesy of BMW OF NORTH AMERICA, INC.