41 33 040 Replacing front wall

WARNING: This page is about a different variant/trim than selected.

Read contents of BODY, GENERAL .

The graphics are schematic representations and are to be applied to the relevant vehicle type.

The following body new parts are required:

Fig 1: Identifying Lock Bridge And Front Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on both sides of vehicle.

Tightening torque 51 11 7AZ .

Release screws (2) on both sides of vehicle.

Tightening torque 41 33 4AZ .

Fig 2: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.