52 13 036 Removing and installing/replacing actuating unit for left or right seat back release

Version with rear panel only: 

Remove rear panel on front seat backrest

Version without rear panel only: 

Raise release handle and release screw (1).

Tightening torque 52 13 05AZ .

Detach release handle.

Release screws (2).

Tightening torque 52 13 07AZ .

Fig 1: Removing Release Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Remove actuating unit (1) from backrest frame.

Fig 2: Removing Actuating Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage Bowden cable (1) from actuating unit.

Fig 3: Disengaging Bowden Cable From Actuating Unit

Courtesy of BMW OF NORTH AMERICA, INC.