34 52 550 Removing and installing/replacing DSC angular rate sensor (DSC sensor)
Necessary preliminary tasks:
- Remove FRONT PASSENGER'S SEAT
- If necessary, remove cover for video module.
- If necessary, partially release floor trim.
Disconnect plug connection (1).
IMPORTANT:
Vibration-sensitive component.
Implement screw connection correctly, otherwise there may be malfunctions in the DSC.
Implement screw connection correctly, otherwise there may be malfunctions in the DSC.
Release nuts (2) and remove DSC sensor.
Installation note:
Tightening torque 34 51 5AZ .