11 12 Cylinder head with lid

TIGHTENING TORQUE SPECIFICATIONS - CYLINDER HEAD WITH LID

	Type	Thread	Tightening specifications	Dimension
1AZ Cylinder head bolts 10.9	N18	M8x95	Replace screws.
			Jointing torque	15 Nm
			1. Angle of rotation	90 °
			2. Angle of rotation	90 °
2AZ Cylinder head bolts	N18	M10x145	Replace screws.
			Jointing torque	30 Nm
			1. Angle of rotation	90 °
			2. Angle of rotation	90 °
3AZ Cylinder head bolts	N18	M8x35	Replace screws.	30 Nm
4AZ Cylinder head cover to cylinder head	N18	M6x30		10 Nm
5AZ Earth cable to cylinder head cover	N18	M6/M5		10 Nm
6AZ Bearing support of eccentric shaft to cylinder head	N18	M6x40 M6x70		10 Nm
7AZ Intake camshaft bearing cap to bearing support	N18	M6x30		10 Nm
8AZ Exhaust camshaft bearing cap to cylinder head	N18	M6x40		10 Nm
9AZ Lifting eye to cylinder head	N18	M8x20 M8x25		20 Nm
10AZ VVT sensor to cylinder head	N18	M6x40		10 Nm
11AZ Acoustic cover to cylinder head cover	N18	M6x40		8.5 Nm