61 31 029 Removing and installing/replacing roof operating facility

Lever out the cover (1) from the roof operating facility.

If necessary, disconnect the microphone plug connection and remove the cover (1).

Fig 1: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Unlock latch mechanisms (2).

Lower the roof operating facility (3).

Disconnect the associated plug connections and remove the roof operating facility (3).

Fig 2: Identifying Roof Operating Unit, Catches And Bolts

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• If necessary, convert BULBS .