31 35 Stabilizer Bar

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

STABILIZER BAR TIGHTENING TORQUES

-	Type	Thread	Tightening specification	Measure
1AZ Retaining bar for stabilizer to front axle carrier / body	E21	-	-	50 Nm
-	E12, E24 / until 5.82	-	-	45 Nm
-	E36, E46, E39, E52, E85, E86	M8	tighten in normal position	21 Nm
-	E60 / except AWD, E65, E66, E67	-	Replace nuts	28 Nm
-	E60 / Four Wheel Drive, E61, E63, E64	-	Replace nuts	30.5 Nm
-	E83	M10 10.9	-	56 Nm
2AZ Stabilizer to control arm	E21	-	tighten in normal position	130 Nm
3AZ Stabilizer link to control arm and stabilizer	E23	M8	tighten in normal position	25 Nm
-	E23	M10	tighten in normal position	50 Nm
4AZ Stabilizer link to control arm	E34 / Four Wheel Drive	-	-	22 Nm
5AZ Stabilizer link to stabilizer	E34 / Four Wheel Drive	-	-	78 Nm
-	E38, E46, E83	-	-	65 Nm
-	E85, E86	M10	-	58 Nm
6AZ Stabilizer link on spring strut shock absorber and stabilizer	E28	(yellow chromeplated)	-	30 Nm
-	E24 / from 5.82, E28 / from 5.82	(white chromeplated)	-	33 Nm
-	E24 / from 5.82, E28, E31, E32, E34	(yellow)	(wrench surface on ball head must be parallel to absorber axle)	59 Nm
7AZ Stabilizer link on spring strut shock absorber and stabilizer (wrench surface on ball head must be parallel to absorber axle)	E36	-	-	59 Nm
-	E30 / Four Wheel Drive	-	-	47 Nm
-	E52	-	-	65 Nm
-	E53	-	-	100 Nm
8AZ Stabilizer link (with bracket) on stabilizer	E30 / Four Wheel Drive	-	-	47 Nm
9AZ Bracket for stabilizer link on control arm	E30, E36	-	-	42 Nm
10AZ Bracket for stabilizer link on swivel bearing	E39, E60, E61, E63, E64	-	-	59 Nm
11AZ Stabilizer link on stabilizer/bracket	E39, E60, E61, E63, E64	-	Replace nut	65 Nm
12AZ Stabilizer link to stabilizer	E65, E66, E67	-	Replace nut	58 Nm