72 11 041 Removing And Installing/Replacing Front Left Or Right Lower Belt Fitting (Seat Belt Tensioner)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove INNER COVER ON FRONT SEAT

WARNING: Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt tensioners.
Improper handling can lead to triggering of the pyrotechnical seat belt tensioner or side airbag, resulting in injuries.

Switch off ignition!

Fig 1: Identifying Seat Belt Tensioner Components

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Disconnect plug connection (3).

Remove lower strap (belt tensioner) (2).

Installation:

Tightening torque: 72 11 05AZ . See SEAT BELTS for specs.