51 47 000 Removing And Installing / Replacing Entrance Cover Strip, Front (Inside) Left Or Right

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Detach entrance cover strip (1) from front and rear trims.

Unclip entrance cover strip (1) in direction of arrow from floor plate.

If necessary, lever clips (2) with end cutting pliers (head of pliers surface-ground) out of floor pan.

Fig 1: Uncliping Entrance Cover Strip From Floor Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clip mounts of entrance cover strip (2) must not be damaged.

Push clips (1) onto entrance cover strip (2).

If necessary, replace faulty clips (1).

Fig 2: Identifying Clips And Entrance Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.