51 22 302 Removing And Installing/Replacing Chrome Strip For Window Cavity Cover Strip, Rear Left Or Right

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 311

Stick adhesive tape (2) below window cavity cover strip (1) (risk of damage).

Using special tool 00 9 311 (starting at front and proceeding to rear), lever out window cavity cover strip (1).

Installation:

Moisten window cavity cover strip (1) with water.

Window cavity cover strip (1) must be flush at front and rear with door edge.

Fig 1: Removing Window Cavity Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seal (1) must be correctly fitted in chrome strip (2).

INITIALIZE POWER WINDOW .

Fig 2: Identifying Seal And Chrome Strip

Courtesy of BMW OF NORTH AMERICA, INC.